Solesol has an automatic thermo-lacquering factory to give your parts a final surface treatment. Through a pre-treatment, cleaning and an electrostatic powder paint coating process, products are given a durable and higher quality finish.
The electrostatic powder paint coating can be applied to steel, hot-dip galvanised steel, continuous galvanised steel, aluminium or stainless steel.
Thermo-lacquering stages
Alkaline degreasing
Phosphatising
Drying oven
Automatic electrostatic booth
Polymerisation oven
"The most suitable coating for metal surfaces"
Thermo-lacquering is an additional protection provided to the product with a different coloured finish.
Characteristics
- Adherence to ISO 2409
- Minimum class 02
- Film thickness
- 60-80 μ
- Durability to ISO 12944
- C2-C5
Advantages
- Increased durability
- Corrosion resistance
- Improved adhesion
- Consistency and uniformity of finish
- Range of standardised colours from the RAL chart
- Low environmental impact
The most requested colours
RAL 8007
RAL 6009
RAL 7001
Applicable standards
- QUALISTEELCOAT: Applied process based on the QUALISTEELCOAT European quality mark QUALISTEELCOAT
- UNE-EN ISO 12944-5: Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Part 5: Protective paint systems. (ISO 12944-5:2019).
- UNE-EN ISO 14713-2: Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures. Part 2: Hot dip galvanising. (ISO 14713-2:2019).
- UNE-EN ISO 2409: Paints and varnishes. Cross-cut test. (ISO 2409:2013).
Would you like to know moreabout our products?
We will provide advice without obligation
