PHOTOVOLTAIC CARPORT
Teleno
Teleno is a PV carport with various configuration possibilities, customisable and with the availability of optional accessories. It is designed to be installed in car parks in commercial and industrial environments to maximise performance and solar energy capture.
Its ease of installation allows it to be installed by anchoring it to a footing. Teleno adapts to the requirements of each project: dimensions and orientation of the photovoltaic module, size and power of the installation.
TELENO
Find out what makes it different
TELENO
The side panel can be customised with a corporate image. Possibility of thermo-lacquering in a corporate colour or the colours of the RAL chart.
Possibility of incorporating LED lighting
Channelling system that ensures the dispersal of water, allowing ventilation of the PV modules and the installation of bi-facial solutions.
Solution with anchoring to foundations without the need for an embedded plate. Direct bolted anchoring for maximum performance on concrete.
Structure able to withstand wind loads of up to 140 km/h and up to 40 kg/m2 of snow
No special aids are required for installation. Bolted joints. Easily handled parts weighing less than 55 kg
OTHERS
Classic profile that leaves the wiring visible and accessible. Limited aesthetics and no customisation.
No other accessories can be fitted.
Uses corrugated sheet metal: impossible to install bi-facial panels.
Embedded plate and prior staking out needed. Difficult coordination in the foundations.
Only able to withstand wind loads of up to 110 km/h and up to 40 kg/m2 of snow
Requires costly assembly and lifting equipment. Difficult to handle pieces weighing up to 250 kg
CLOSED SECTION
Non visible and safe wiring passage.
HIGH LOAD RESISTANCE
WIND: Up to 140 km/h
Snow: Up to Hasta 40 Kg/m2
CTE DB SE AE
Terrain IV, ZONA C
QUICK INSTALLATION
Light structure and reduced number of components
OPTIONAL ACCESSORIES
Possibility of incorporating corrugated sheet metal, customised colour and water channelling kit
TELENO
Characteristics
FOUNDATIONS AND ANCHORING
- Requires low volume of concrete
ISOLATED FOOTING
FINISHINGS
S275JR steel portal frame and lintel, S350GD ZM310 zinc-magnesium alloy steel purlins and 6005A T6 aluminium fixing components.
HIGH PROTECTION
Galvanised + pre-treatment + thermo-lacquering
Treatment suitable for Category C4 environments
VERY HIGH PROTECTION
Galvanised + pre-treatment + primer + thermo-lacquering
Treatment suitable for Category C5 environments
COLOURS
Complementary protection through a thermo-lacquering process that finishes the parts in different colours, which are long-lasting and of higher quality. Possibility of thermo-lacquering in other colours on request, including corporate colours.
PHOTOVOLTAIC CARPORT
Our solutions
TELENO single
TS-N
TS-S
TELENO double
TD-T
TD-Y
TELENO
Technical data
Below, you can find more details about the technical characteristics offered by Teleno.
WIND RESISTANCE
Up to 140 Km/h (Terrain IV, CTE DB SE AE) ZONE C
SNOW RESISTANCE
Up to 40 Kg/m2
MATERIALS
Available in carbon steel or zinc-magnesium steel alloy (S350GDZM310)
FINISHINGS
Possibility of thermo-lacquering depending on environment (C2, C3, C4)
AVAILABLE COLOURS (RAL)
Complementary protection through a thermo-lacquering process that finishes the parts in different colours, which are long-lasting and of higher quality
CLEAR HEIGHT (MM)
Minimum 2300
Maximum 2700
DISTANCE BETWEEN POSTS (MM)
1 space 2500 / 3000
2 spaces 5000
LENGTH (MM)
5000
INCLINATION
5º
CLEAR HEIGHT (MM)
Minimum 2300
Maximum 3100
DISTANCE BETWEEN POSTS (MM)
5000
LENGTH (MM)
9800
INCLINATION
5º
Logistics and assembly
- Compact design and low volume packaging
- Reduced weight for easy logistics and assembly
- Closed section tubes for non-visible cable routing
- Reduced number of components. Quick installation
TELENO
Frequently asked questions
Yes. SOLASOL canopies are modular and can be adapted to any panel type.
No. The parts that make up the structure are easy to handle and are light in terms of size and weight to facilitate handling. To install the carport, all you need is a lifting platform or a professional ladder.
No. This structure has been designed to be installed on the ground. If you want a structure for the terrace, contact our sales department and they will give you details of the solutions we have available.
It depends on the type of panel being installed. In most cases, it is possible to fit 9 to 15 units per 2-space module.
Yes. Our structures have the European CE certificate and comply with all current regulations and the CTE.
Please consult the guarantee conditions.
Yes. SOLASOL canopies have been designed to withstand the pressures and loads that can occur in any part of the country.
We offer the Teleno carport with a limited range of RAL colours. However, the structure can be thermo-lacquered in any colour, as long as it is on the RAL reference chart.
Yes, it’s normal. Some of our parts are given a discontinuous galvanised treatment (hot-dip) to make them more resistant and durable. During this, it is common for roughness or imperfections to appear on the parts that have undergone this process.
The structure must not be drilled or bored. The structure is designed with all the holes, sections and machining needed, so no further action is necessary.
If you need specific manufacturing, please contact our technical department.
